Touchscreens have become an integral part of many HP devices, allowing for easy and intuitive interaction. However, there are situations where disabling the touchscreen functionality may be necessary, such as when using external input devices or to prevent accidental touches. In this article, we will provide a step-by-step guide on how to disable touchscreen on HP devices. Follow these instructions to regain control over your device’s input options.
Steps to Disable Touchscreen on HP Devices
Step 1: The first step is to open the Device Manager on your HP device. You can do this by right-clicking on the Start button and selecting Device Manager from the context menu that appears.
Step 2: In the Device Manager window, locate and expand the Human Interface Devices section. This section contains the drivers for various input devices, including the touchscreen.
Step 3: Within the Human Interface Devices section, look for a driver that corresponds to your touchscreen. The name of the driver may vary depending on the specific model of your HP device. Right-click on the touchscreen driver and select Disable device from the context menu.
Step 4: A confirmation dialog box will appear asking if you are sure you want to disable the device. Click on the Yes button to proceed. The touchscreen will now be disabled.
Step 5: After disabling the touchscreen, it is recommended to restart your HP device. This will ensure that the changes take effect and the touchscreen remains disabled even after a reboot.
Step 6: If you wish to re-enable the touchscreen functionality at any point, follow steps 1 to 3 to access the Device Manager. Locate the touchscreen driver and select Enable device from the context menu. Restart your device for the changes to take effect.
Alternate Methods to Disable Touchscreen on HP Devices
Method 1: Disable Touchscreen on HP Devices Using Device Settings
This method may not be available on all HP devices, as it depends on the specific model and software version. But if you did not get success through the above method, then try this once:-
Step 1: Press the Windows key + I on your keyboard to open the Settings app.
Step 2: Select Devices from the available options.
Step 3: In the Devices window, click on the Touchpad tab in the left sidebar.
Step 4: Under the Touchpad section, you will find a toggle switch labeled Touchpad. Toggle it off to disable the touchscreen functionality.
Step 5: Close the Settings app. The touchscreen will now be disabled.
Method 2: Disable Touchscreen on HP Devices using Registry Editor
Modifying the Windows Registry can have serious consequences if not done correctly. It is recommended to create a backup of your registry or create a system restore point before proceeding. Below a method to disable the touchscreen on HP devices using the Registry Editor:
Step 1: Press the Windows key + R on your keyboard to open the Run dialog box.
Step 2: Type regedit in the Run dialog box and press Enter. This will open the Registry Editor.
Step 3: Navigate to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\EdgeUI
Step 4: If the EdgeUI key does not exist, right-click on the Windows key, select New, and then choose Key. Name the new key EdgeUI.
Step 5: Then, right-click on the right-side pane, select New, and choose DWORD (32-bit) Value. Name the new value as AllowEdgeSwipe.
Step 6: Double-click on the AllowEdgeSwipe value and set its data to 0. This will disable the touchscreen functionality.
Step 7: Close the Registry Editor.
Step 8: Restart your HP device for the changes to take effect.
To enable the touchscreen functionality again, follow the same steps and set the value data of AllowEdgeSwipe to 1 or delete the AllowEdgeSwipe value altogether.
Method 3: Disable Touchscreen on HP Devices using Command Prompt
The “devcon.exe” utility is a command-line tool used for device management in Windows. Make sure to run the Command Prompt as an administrator to execute the commands successfully. Below provide the steps, to follow and complete:-
Step 1: Press the Windows key + X on your keyboard to open the Power User menu. From the menu, select Command Prompt (Admin) to open the Command Prompt with Administrative Privileges.
Step 2: Then, type the following command devcon.exe findall = *touch* and press Enter. This command will display a list of Touchscreen devices on your HP device.
Step 3: Identify the device ID of the touchscreen device you want to disable from the list. It usually starts with HID\VID_” or “ACPI\HPQ.
Step 4: Once you have identified the Device ID, type the following command devcon.exe disable <DeviceID> and click on Enter.
Replace <DeviceID> with the actual Device ID you obtained in Step 3. For example, devcon.exe disable HID\VID_1234&PID_5678&MI_00. This command will disable the specified touchscreen device.
Step 5: Close the Command Prompt.
Step 6: Restart your HP device for the changes to take effect.
Note: To enable the touchscreen functionality again, you can use the following command devcon.exe enable <DeviceID> in the Command Prompt.
Conclusion
While HP does not currently offer a specific utility application for disabling the touchscreen on their devices, there are several alternative methods available. By utilizing the Device Manager, Device Settings, or modifying the Registry Editor, users can effectively disable the touchscreen functionality on their HP devices. It’s important to exercise caution and follow the specific instructions provided by HP for your device model and software version. Stay updated with the latest HP resources for any potential utility applications that may be released in the future. We hope this guide has been helpful in providing you with the necessary steps to disable the touchscreen on your HP device. Take care and enjoy your device to its fullest potential.
You may also like:
How to React to Messages on Instagram?
Why is My Fujifilm Camera Blinking Red?
FAQ’s
Q:- How do I disable the touchscreen on my HP laptop?
Ans:- To disable the touchscreen on your HP laptop, you can use the Device Manager. Open the Device Manager, locate the touchscreen driver in the Human Interface Devices section, right-click on it, and select Disable device. Restart your laptop for the changes to take effect.
Q:- Can I disable the touchscreen on my HP all-in-one PC?
Ans:- Yes, you can disable the touchscreen on your HP all-in-one PC. Open the Device Manager, find the touchscreen driver under Human Interface Devices, right-click on it, and choose Disable device. Restart your PC to complete the process.
Q:- Is there a way to temporarily disable the touchscreen on my HP device?
Ans:- Yes, you can temporarily disable the touchscreen on your HP device. Open the Device Settings or the Control Panel, go to the Touchpad or Pen & Touch settings, and disable the touchscreen option. This will allow you to re-enable it later when needed.
Q:- How can I enable the touchscreen again after disabling it on my HP device?
Ans:- To enable the touchscreen again after disabling it on your HP device, follow the same steps as mentioned for disabling but select “Enable device” instead. Restart your device for the changes to take effect.
Q:- Is there a way to disable the touchscreen on an HP device using the software?
Ans:- While HP does not offer a dedicated utility application for disabling the touchscreen, you can use alternative methods such as the Device Manager or modifying the Registry Editor. These methods allow you to control the touchscreen functionality effectively.
