If you have been facing issues if the Fix Vizio SmartCast TV Not Working Or Not Available, you have to choose one of the following solutions. In this tutorial, I have come up with the five most useful and working solutions. So you can fix it if Vizio SmartCast TV was not working or not available.
Solution To Fix Vizio SmartCast TV Not Working Or Not Available
Check The Internet Connection
You can do a speed test to see if your internet connection is good enough. Or you can increase the speed of the network by changing the position and location of the router.
Use Other Network
You can check if it works or not by connecting Vizio SmartCast TV with another network. You can use your mobile hotspot to do it. It helps you determine if the ISP causes the issue or not. So, use another ISP.
Try Performing A Power Cycle
- Power cycle the SmartCast TV and your network devices to erase your temporary configurations that may cause this issue.
- Turn off your modem, router, and TV.
- Unplug all these devices and wait for at least 60 seconds.
- Then plug the Modena and let it fully connect, and perform the same with your router.
- Then plug in the Vizio SmartCast TV and turn off the TV.
- Try checking if it still gives an error or not.
Read: How To Install Sportz TV on Firestick
Try Changing DHCP Settings
When the above-given solutions don’t work, you can change the DHCP Settings of your network. It will assign different IP addresses to your devices to prevent the error.
- Turn off the Vizio SmartCast TV.
- Type out Router’s URL on the computer.
- Log in with your username and password.
- Navigate to SETTINGS and navigate for the DHCP Settings available in the ADVANCED or NETWORK SETTINGS option.
- See if it is ENABLED or click to Enable if not. Or disable it and ENABLE it again.
- Click on the SAVE and CLOSE the SETTINGS page.
- Turn your TV on and see if an error has gone or not.
Read: How To Watch Live Sports On Firestick
Try Factory Reset Of Vizio SmartCast TV
It is your last option to fix if Vizio SmartCast TV was not working or not available. You need to consider all the instructions carefully for factory reset. If there are any mistakes, you may lose all settings, apps, and content. Do it using your device’s menu button following these steps.
- Press the menu button and select the system.
- Enter into RESET & ADMIN to select RESET TV to FACTORY SETTINGS.
- You can press your TV’s volume button and input the bottom together for five seconds to perform a factory reset from the TV. It will show a bar on the screen.
- Then press the input button a second time for five seconds until the screen turns off.
- After that, turn on the TV and follow the reset procedure.
Final Thoughts:
Did you try any of these solutions to fix the issue when Vizio SmartCast TV was not working or not available? Which troubleshoot was the most appropriate for your problem? Also, let us know how it worked for you. So, you can help other viewers so that they can solve their problems too.
You might also like
How To Watch Zee5 On Firestick
