If you are also facing problems with your Airpods and it is not getting charged, then we are going to discuss the same here, let’s see how to fix If your AirPods won’t charge.
We can understand how sad you must be because of this when you need it and it stops charging. But you will also be happy to know that there are many ways to deal with this problem, and you can fix it in a very easy way.
When any error comes, there is definitely some problem behind it, then there will be some reason for this problem, so let’s see and know about it.
Read:- Find My Lost AirPods when they are Offline and Dead
How to Fix Airpods Not Charging?
Most Apple AirPods users have experienced this annoying issue at some point. If one or both of your AirPods are not charging in their case, follow these steps to troubleshoot the issue.
Please read the tips in the next section if the problem is with the charging of your AirPods case. Check out our free Tip of the Day for additional advice on fixing Apple devices. Follow these given methods:-
Check the Charging Case
Many times it happens that you have to face this problem due to the failure of the charging case or due to some problem in it. If you frequently use the AirPods, it’s easy to forget to keep the case charged.
It’s possible that the case itself needs to be recharged before it can start charging your AirPods. Ideally, the case itself should have at least a 10% charge; else, the AirPods may suffer. Put the case with the AirPods inside close to your phone to see the battery status indication appear on the screen if you need to check the battery life.
Change your USB Cable
Try connecting it to your computer or wall charger with another USB-to-lightning connection to see if it helps, unless you have a wireless case, and even then, only in that case before giving up.
Sometimes, even though a device appears to be broken, the issue may actually be with the USB cable. Since we frequently use USB cables, they eventually break or lose their strength.
The best approach to discard this accessory and proceed to the next stage is to test the lightning connector with a second cable rather than cleaning the pins, which can occasionally get rusty, dirty, or even both.
Check your AirPods Charging Status & Case Battery Life
If you see that your AirPods is connecting easily then it simply means that there is some problem inside but follow the below steps to check the charging status and battery of your AirPods and AirPods case please follow:-
Step 1:
First, you need to insert both AirPods into the charging case and close the charging case.
Then, open the charging case.
Step 2:
After that, you need to hold your AirPods case close to your iPhone.
Step 3:
Then, you can see that the charging status will appear on your iPhone screen.
Step 4:
Make sure the AirPods case has a charge of at least 10%. The case needs to be plugged in to charge your AirPods if the remaining battery life is less than 10%.
Note:- If your charging cable is working properly then it means that there is some other problem, and if the charging cable is not working then you should understand that you have to change the charging cable.
Remove and Re-insert your Airpods
Similar to the “Turn it OFF and ON again” method, just taking out and replacing the AirPods case may let the contact points rejoin properly, allowing it to charge normally.
Clean the AirPod and Charging Case
The dirt on your AirPods could be obstructing the circuit that permits them to charge if they are unclean. The most typical fix for charging problems with AirPods and AirPods cases is this.
I suggest looking at this guide for tips on how to clean your AirPods effectively. After cleaning them, you can put them back into the casing to check if they’ll start to charge.
Reset AirPods
Here we will tell you how to reset Airpods, on the basis of which you can reset and solve this issue, follow these given steps:-
Step 1:
First, you need to put your AirPods in their case and then close the lid.
Step 2:
Then, you need to wait approx 30 seconds, then open the lid again.
Step 3:
Then, open the iPhone device,
- Open the Settings option.
- Then, name your AirPods.
- After that, Bluetooth and then click on the circled “I” icon next to your AirPods.
Step 4:
Click on the Forget This Device at the bottom of the page.
Step 5:
After that, click it once more for confirmation.
Step 6:
Press and hold the button on the rear of the AirPods case for roughly 15 seconds with the lid open until you see the status light blinking amber.
Step 7:
The status light is located within the case between the AirPods if you can only charge your AirPods case through a cable connection.
Step 8:
The status light is located on the front of the case if you are using AirPods Pro or an AirPods case that wirelessly charges your AirPods.
Step 9:
Place your AirPods near your device with the case lid open, then reconnect them by following the on-screen instructions.
You can also watch this video
Contact Apple Customer Support
If none of the methods mentioned above have been able to fix your issue, then you should talk to your Apple Customer Support and tell them your problem. All you have to do is visit their page and call them or if you are not comfortable talking then tell them your problem via text. Apple customer support will assist you with any issues and help you resolve your issue.
Final Thoughts
Through the above-mentioned methods that are how to fix Airpod not Charging, you would have been able to solve your issue and hope that your problem would have been solved. Also, if you have any problem related to this, then you can feel free to tell us by mentioning it in our comment section. We will provide the best solution related to your question.
